Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels

Overall size is 13" wide by 15" long. 13" wide by 15" long. Made by a small tool manufacturer in the Czech Republic. This leather tool roll os the perfect solution to organizing and protecting you woodworking chisels. 16 pockets. It is made from genuine suede leather and has 16 pockets. Tool roll is made from suede leather.

.

Narex Made in Czech Republic Premium 8 pc set 6 1/4", 8 5/16", 10 3/8" 12 1/2", 16 5/8" 20 11/16" , 26 1" 1/16", 32 1 1/4" mm Chisels w/ Hornbeam Handles

These chisels are an excellent value in a good quality tool. This is a premium 8 piece set contains the following sizes:6 1/4", 16 5/8" 20 11/16", 10 3/8" 12 1/2", 8 5/16", 26 1" 1/16" and 32 1 1/4" mm. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.

They come in a retail box. Made by a small tool manufacturer in the Czech Republic. Handles are made from super hard European Hornbeam. Handles are stained Hornbeam and 5 1/2" long. Overall sizes range in length from 9 7/8" to 11". The blades take and hold an excellent edge. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.

As with all edge tool, they'll need sharpening before use. These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. 6 1/4", 16 5/8" 20 11/16", 10 3/8" 12 1/2", 26 1" 1/16", 8 5/16", 32 1 1/4" mm. Bevel ground at a 25 degree bevel. Blades have well-seated heavy steel tangs and handles a brass ferrules to withstand vigorous mallet work.




Similar products:
Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels
Crown 4-1/2-inch Beechwood Mallet
Faithfull Leather Chisel Roll - 8 Pocket
Chisel / Mortise Chisel Set - 4-pcs by Narex
Robert Larson 800-1800 Honing Guide
Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker
Dozuki "Z" Saw
Eagle America 415-9307 Dovetail Marker
Solid Brass Wheel Woodworking Precision Marking Cutting Gauge with Micro Adjust Head MGB
Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900


Narex Square Blade Birdcage Woodworking Scratch Awl 874710

Ideal for pre-drilling for screws or even for general layout work. Handles are made from super-hard European Hornbeam. Blade length is 3 1/2 inch handle length is 2 1/2 inch with a 1 1/2 inch diameter. Made by a small tool manufacturer in the Czech Republic. Handles are made from super hard European Hornbeam.

. This is an excellent value in a high quality tool. High carbon tool steel blade. Scratch awls are ideal for quickly pre-drilling for screws or even for general layout work. Made by a small tool manufacturer in the Czech Republic. In 2008 fww earned author's choice for "Best Value" in the western style bench chisel category.

Works well in hardwoods. This is a square blade birdcage scratch awl made by a small Czech firm. Blade length is 3 1/2". Has a beautifully turned stained beech handle with steel ferrule, 2 1/2" long x 1 1/2" diameter. It has a beautifully turned stained beech handle with steel ferrule and a high carbon tool steel blade.

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. 6 1/4", 26 1" 1/16", 10 3/8" 12 1/2", 16 5/8" 20 11/16", 8 5/16", 32 1 1/4" mm.


Similar products:
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800
Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900
Stanley 10-049 Pocket Knife with Rotating Blade
Stanley 11-041 Utility Replacement Blade
Stanley 11-040 Sheepfoot Replacement Blade
Working Wood 1 & 2: the Artisan Course with Paul Sellers
Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels
Sliding T Bevel 8" Blade
Eclipse EWWQR7-NA Quick Release Woodworking Vice, Gray Cast Iron, 7" Size
Narex 200 mm 8" Half Round Cabinetmaker Wood Fine Cut Rasp 872572


Narex 12 Piece Chisel Set Containing 3 mm 1/8" 4 mm 3/16", 6 mm 1/4", 8 mm 5/16", 10 mm 3/8" 12 mm 1/2", 16 mm 5/8", 20 mm 11/16" , 26 mm 1 1/16", 32 mm 1 1/4", 40 mm 1 5/8" and 50 mm 2" 810103-50

These chisels are an excellent value in a good quality tool. Overall sizes range in length from 9 8 to 11 3/4 inches long. They do not come in a retail box. Blades have well seated steel tangs and handles have steel ferrules to withstand vigorous mallet work. As with all fine edge tools, they will need final sharpening/honing before use.

Made by a small tool manufacturer in the Czech Republic. Made by a small tool manufacturer in the Czech Republic. Blades are 4 1/2 inch inches to 6 1/2 inches long. In 2008 fww earned author's choice for "Best Value" in the western style bench chisel category. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.

The blades take and hold an excellent edge. Blade bevels are ground at a 25 degree angle. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. High carbon tool steel blade. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.

6 1/4", 8 5/16", 26 1" 1/16", 10 3/8" 12 1/2", 16 5/8" 20 11/16", 32 1 1/4" mm. Bevel ground at a 25 degree bevel.


Similar products:
Crown 4-1/2-inch Beechwood Mallet
Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels
Robert Larson 800-1800 Honing Guide
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800
Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker
Eagle America 415-9307 Dovetail Marker
Narex 460 gram 16 oz Beech Wood Carving Mallet
Dozuki "Z" Saw
Narex 6 pc set 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, and 12 mm Mortise Chisels 811204-811212
Stanley 12-136 No. 4 Smoothing Bench Plane


Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800

Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side. Blade is. 090" thick and. 380" wide and 2. 75" long. Made by a small tool manufacturer in the Czech Republic. Handles are made from super hard European Hornbeam. Set included 3, 4, 10, 32, 20, 8, 6, 12, 16, 26, 40 and 50 mm.

Bevel ground at a 25 degree bevel. Ideal for pre-drilling for screws or even for general layout work. Has a beautifully turned stained beech handle with steel ferrule, 2 1/2" long x 1 1/2" diameter. Blade is made from highly allowed Cr-Mn steel and heat treated to HRc 58. This carving/marking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality.

This knife an excellent value for a good quality tool. Made by a small tool manufacturer in the Czech Republic. Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side, Knife comes super sharp and ready for use. Made by a small tool manufacturer in the Czech Republic.

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. Handle is of european Beech with an octagonal cross section and 4.


Similar products:
Narex Square Blade Birdcage Woodworking Scratch Awl 874710
Solid Brass Wheel Woodworking Precision Marking Cutting Gauge with Micro Adjust Head MGB
Eagle America 415-9307 Dovetail Marker
Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900
iGaging 34-707 Wheel Marking Gauge with 1/32nd & 1 mm scale
Crown 4-1/2-inch Beechwood Mallet
Robert Larson 800-1800 Honing Guide
Gyokucho 372 Razor Saw Dotsuki Takebiki Saw
Dozuki "Z" Saw
Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker


Crown 4-1/2-inch Beechwood Mallet

Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic. Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58. Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side. Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, England.

Crown 106 20oz. High carbon tool steel blade. Handles are made from laquered European Beech. Made by a small tool manufacturer in the Czech Republic. Blade is. 090" thick and. 380" wide. Handles are made from super-hard European Hornbeam. Set included 3, 32, 12, 8, 4, 16, 26, 6, 10, 20, 40 and 50 mm. Bevel ground at a 25 degree bevel.

Blade length is 2. 75" long and handle is 4. 125" long. Blade length is 3 1/2". Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.


Similar products:
Eagle America 415-9307 Dovetail Marker
Dozuki "Z" Saw
Stanley 16-791 Sweetheart 750 Series Socket Chisel Set, Brown, 4 - Piece
Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker
Stanley 16-793 Sweetheart 750 Series Socket Chisel 8 Piece Set
Robert Larson 800-1800 Honing Guide
Stanley 16-401 Bailey Chisel Set, 5-Piece
Solid Brass Wheel Woodworking Precision Marking Cutting Gauge with Micro Adjust Head MGB
Lewis Bag - Ice Crushing Canvas Bag with Drawstring
Lewis Ice Bag (1, 11 IN)


Narex 460 gram 16 oz Beech Wood Carving Mallet

Ideal for pre-drilling for screws or even for general layout work. Head has 5 degree angle to ensure a square strike each time. Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic. Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58. Blade length is 2.

75" long and handle is 4. 125" long. High carbon tool steel blade. Set included 3, 20, 6, 12, 8, 26, 16, 10, 4, 32, 40 and 50 mm. Bevel ground at a 25 degree bevel. Made by a small tool manufacturer in the Czech Republic. This solid wood carving mallet is made by a small tool manufacturer in the Czech Republic and is of exceptional quality.

. Total weight: 16 oz 460g. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. Has a beautifully turned stained beech handle with steel ferrule, 2 1/2" long x 1 1/2" diameter.

Head size: 4 1/4" x 3" x 2 1/4" thick. Handles are made from super-hard European Hornbeam.


Similar products:
Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworking Chisels 863010
Robert Larson 800-1800 Honing Guide
Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker
Narex 6 pc set 6mm (1/4"), 10 (3/8"), 12 (1/2"), 16 (5/8"), 20 (13/16") , 26 (1 1/16") Woodworking Chisels in Wooden Presentation Box 853053
Dozuki "Z" Saw
Eagle America 415-9307 Dovetail Marker
Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle, Stainless Steel Blade and Brass Fittings
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800
Solid Brass Wheel Woodworking Precision Marking Cutting Gauge with Micro Adjust Head MGB
Gyokucho 372 Razor Saw Dotsuki Takebiki Saw


4-pcs by Narex - Chisel / Mortise Chisel Set

Blade length is 3 1/2". Handles are made from super-hard European Hornbeam. Handles are made from super hard European Hornbeam. Robust tool used for chopping out joints as well as cutting mortises. Excellent cutting performance is reached by side tapering in height and lenghtwise. Ideal for pre-drilling for screws or even for general layout work.

From tip to shoulder for sidewall clearance. Head and handle material unfinished European Beech. Made by a small tool manufacturer in the Czech Republic. In 2008 fww earned author's choice for "Best Value" in the western style bench chisel category. The blade is forged from Cr-Mn steel and heat treated up to 59 HRc.

Total weight: 16 oz 460g. Made by a small tool manufacturer in the Czech Republic. The handle is made of dark stained and waxed beech wood with steel ferrule and hoop. Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, England. Made by a small tool manufacturer in the Czech Republic. Handles are made from laquered European Beech.

Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side.


Similar products:
Crown 4-1/2-inch Beechwood Mallet
Robert Larson 800-1800 Honing Guide
Woodstock D3830 Router Plane
Eagle America 415-9307 Dovetail Marker
Dozuki "Z" Saw
Solid Brass Wheel Woodworking Precision Marking Cutting Gauge with Micro Adjust Head MGB
Narex 6 pc set 6mm (1/4"), 10 (3/8"), 12 (1/2"), 16 (5/8"), 20 (13/16") , 26 (1 1/16") Woodworking Chisels in Wooden Presentation Box 853053
Narex 460 gram 16 oz Beech Wood Carving Mallet
iGaging 34-707 Wheel Marking Gauge with 1/32nd & 1 mm scale
Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker


Narex 6 pc set 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, and 12 mm Mortise Chisels 811204-811212

Blade length is 3 1/2". Total weight: 16 oz 460g. Handles are made from super-hard European Hornbeam. Made by a small tool manufacturer in the Czech Republic. Handles are stained beech and are 6 1/8 inches long and 1 1/2 inches in diameter for a good firm grip. Handles are made from laquered European Beech. This is a set of 6 mortise chisels.

Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side. Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic. Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58. The blade widths taper. 030 inches from tip to shoulder for sidewall clearance.

High carbon tool steel blade. In 2008 fww earned author's choice for "Best Value" in the western style bench chisel category. 6 1/4", 8 5/16", 26 1" 1/16", 16 5/8" 20 11/16", 10 3/8" 12 1/2", 32 1 1/4" mm. Bevel ground at a 25 degree bevel. Set included 3, 20, 16, 10, 12, 8, 4, 26, 32, 6, 40 and 50 mm. Bevel ground at a 25 degree bevel.

Overall lengths are 12 inches.


Similar products:
Narex 6 pc set 6mm (1/4"), 10 (3/8"), 12 (1/2"), 16 (5/8"), 20 (13/16") , 26 (1 1/16") Woodworking Chisels in Wooden Presentation Box 853053
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800
Crown 4-1/2-inch Beechwood Mallet
Eagle America 415-9307 Dovetail Marker
Dozuki "Z" Saw
Narex 460 gram 16 oz Beech Wood Carving Mallet
Wood Is Good WD205 Mallet, 18-Ounce
Narex Square Blade Birdcage Woodworking Scratch Awl 874710
iGaging Premium Marking Knife Striking Super Sharp HSS Hardened Steel Blade
Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels


Narex Czech Steel Premium 8 pc Set True Imperial 1/8", 1/4", 3/8", 1/2", 5/8" 3/4", 7/8" and 1" Bench Cabinetmaker Chisels w/ Hornbeam Handles 863251/863253

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. Made by a small tool manufacturer in the Czech Republic. Blades have well-seated heavy steel tangs and handles have brass ferrules to withstand vigorous mallet work. Handles are made from super hard European Hornbeam.

Contains the following sizes: 4mm, 6 mm, 5mm, 8 mm, 10 mm and 12 mm. Bevel ground at a 25 degree bevel. Handles are made from stained Beechwood. Head has chamfered edges to prevent splintering. Overall length: 11" 275 mm. Ideal for pre-drilling for screws or even for general layout work. Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, England.

The blade is forged from Cr-Mn steel and heat treated up to 59 HRc. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. 6 1/4", 26 1" 1/16", 10 3/8" 12 1/2", 8 5/16", 16 5/8" 20 11/16", 32 1 1/4" mm. Bevel ground at a 25 degree bevel. Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic.

Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58.


Similar products:
Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels
Crown 4-1/2-inch Beechwood Mallet
Stanley 10-049 Pocket Knife with Rotating Blade
Trend UDWS/HP/LS Honing Compound Leather Strop
Gyokucho 372 Razor Saw Dotsuki Takebiki Saw
Dozuki "Z" Saw
Thor - 712R Soft And Hard Faced Hammer Wood Handle 650G
Robert Larson 800-1800 Honing Guide
Woodstock D2902 1-Pound Extra Fine Buffing Compound, Green
Narex Square Blade Birdcage Woodworking Scratch Awl 874710


Narex Pair 1/2" and 3/4" Dovetail Japanese Style Chisels

Made to our specifications by a highly respected tool manufacturer in the Czech Republic. Handles are made from stained European Beechwood. Handles are made from super hard European Hornbeam. These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.

Head size: 4 1/4" x 3" x 2 1/4" thick. Handles are stained beech and 5 1/4" long, 1 1/4" in diameter and have 2 antique brass ferrules. The handle is made of dark stained and waxed beech wood with steel ferrule and hoop. Made by a small tool manufacturer in the Czech Republic. Ideal for pre-drilling for screws or even for general layout work.

Contains the following sizes: 4mm, 8 mm, 6 mm, 5mm, 10 mm and 12 mm. Bevel ground at a 25 degree bevel. Handles are made from stained Beechwood. Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side. Total weight: 16 oz 460g. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.




Similar products:
Narex Czech Steel Dovetail Japanese Style Chisel 1/4", 1/2" 3/4" 813507-19 (1/4")
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800
Eagle America 415-9307 Dovetail Marker
Narex Right & Left 12 mm 1/2" Skew Paring Chisels 81112/811162
Narex Square Blade Birdcage Woodworking Scratch Awl 874710
Chisel / Corner Chisel 90°
Gyokucho 372 Razor Saw Dotsuki Takebiki Saw
Dozuki "Z" Saw
Narex Leather 16 Pocket Tool Roll for Carving Tools or Chisels
Gyokucho Dozuki Noko Giri 9-1/2" Dovetail Razor Saw from Japan Woodworker