Vortex Optics Diamondback Tactical 4-12 x 40 Riflescope

A zero-reset feature lets you re-index the zero reference marks on both turrets after sight in, while fiber optic rotation indicators integrated into the turrets provide a visual cue of your turret's position. Uses premium components in the zoom lens mechanism to ensure smooth magnification changes under the Harshest conditions.

1 inch tube, 100 yard parallax setting, 40mm lens diameter, 1/4 MOA, 3.8in Eye relief. These turrets track better than any bloodhound and reliably return to zero every time. When we say precise-we mean it. Extra-low dispersion XD glass increases resolution and color fidelity, resulting in crisp, sharp images.

Exposed tactical turrets built for dialing elevation and wind age allow quick and precise bullet drop and wind drift compensation at extended ranges. Waterproof, shockproof and Fog proof. Proprietary coatings increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

---

Vortex Optics Sport Cantilever 1-Inch Mount - 2-Inch Offset CM-102

Vortex cantilever ring Mount for 1-Inch Tube w/ 2in Offset, 1. 59in/4039mm, black cm-102, matte, 2" Offset 1.59" / 4039mmv 2. 5" between rings use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle.

The cantilever ring mount positions the center of the riflescope tube at a height of 1. 59 inches 4039 mm from the base. Weighs 6. 7 ounces. Aluminum contruction.


Similar products:

---

Vortex Optics Hunter 1" Medium Rings Set

Mounting to a pica tinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle.

The cantilever ring mount positions the center of the riflescope tube at a height of 1. 59 inches 4039 mm from the base. Weighs 6. 7 ounces. Aluminum contruction. These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength. Sold two rings per package. Made from aircraft-grade 6061-T6 aluminum for optimum strength.


Similar products:

---

Objective Lens O-40 45.5-48.5 mm - Vortex Optics Defender Flip Cap

Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle. The cantilever ring mount positions the center of the riflescope tube at a height of 1.

59 inches 4039 mm from the base. Vortex optics defender flip cap Front Lens Rifle Scope Cover, Black - O-40 Weighs 6. 7 ounces. Aluminum contruction. These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength. Sold two rings per package. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need. A stainless steel spring flips the cap into multiple stop positions at 45 and 90 degrees.




Similar products:

---

Vortex Optics Defender Flip Cap - Eyepiece E-10 40-46mm

This is the last flip cap you will ever need. Objective-40 fits: rzr-1589, dbk-m-04p, cf2-310019, dbk-04-bdc, cf2-310017, rzr-1572, dbk-m-01p, cf2-31005, rzr-1565, dbk-10023, cf2-31007, rzr-1558, dbk-01-bdc, dbk-10025, CF2-310025. Made in the USA. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need.

A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees. The second at a 45 and the third at 90 to lay flat back. Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics and features a snap flat spring that will keep your line of sight unobstructed.

The e-10 cap is has three stop positions. Weighs 6. 7 ounces. Aluminum contruction. These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength.


Similar products:

---

Vortex Viper 1-Inch Rings Set of 2 Low Height TBD

Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41. 5-46 mm | 1. 6-1. 8 inches. Objective-40 fits: rzr-1589, dbk-10025, cf2-310019, cf2-310017, dbk-01-bdc, dbk-m-01p, rzr-1572, cf2-31007, rzr-1558, dbk-m-04p, dbk-04-bdc, cf2-31005, dbk-10023, rzr-1565, CF2-310025.

Made in the USA. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need. A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees. Durable and streamlined 4 screw rings for secure mounting of 1 inch rifle scopes, Vortex`s Viper Scope Rings make a secure mounting quick and easy.

Features: precision machined from 6061-t6 aluminum alloy permanently attaches to base square-Edged Crossbolt Ensures Positive Engagement of Ring to Base Durable Black Matte Anodized Finish Sold 2 Rings / Package Sizing High: These Vortex Viper Rings position the center of the riflescope tube at a height of 1.

03 inches 26. 16 mm from the base. Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle.


Similar products:

---

Wheeler Firearms Accurizing Torque Wrench

Objective-40 fits: rzr-1589, dbk-10023, dbk-m-04p, dbk-04-bdc, rzr-1558, dbk-01-bdc, cf2-310017, cf2-31007, cf2-31005, cf2-310019, dbk-10025, rzr-1572, rzr-1565, dbk-m-01p, CF2-310025. Made in the USA. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need.

A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees. Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41. 5-46 mm | 1. 6-1. 8 inches. Weighs 6. 7 ounces. Aluminum contruction.

These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.


Similar products:

---

Burris XTR Rings 1 Inch Medium 420181, Black

Non-quick detach model. 1 inch pair of rings. They are also great for hunting rifles, slug guns or muzzleloaders. Matte Black Finish. The vertical position is for inserting your dope disk in to have easy access to while shooting. From smaller carbines to the most powerful magnums, XTR rings will stand up to years of use and recoil.

Made in the USA. Please read all label information on delivery. Torque adjustment range from 10 inch/pounds to 65 inch/pounds, Includes convenient molded case for storage. Accuracy plus/minus 2 inch/pounds up to 40 inch/pounds, 40-65 inch/opounds is accurate to plus/minus 5%. Objective-40 fits: rzr-1589, dbk-04-bdc, rzr-1565, cf2-31007, cf2-31005, dbk-01-bdc, dbk-10023, dbk-m-04p, dbk-m-01p, cf2-310019, cf2-310017, rzr-1558, dbk-10025, rzr-1572, CF2-310025.

Made in the USA. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need. A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees. Weighs 6. 7 ounces. Aluminum contruction.


Similar products:

---

Harris Engineering S-BRM Hinged Base 6 - 9-Inch BiPod

100% made in the USA. Includes 10 of the more popular gunsmithing bits and a 1/4" socket. Legs are spring loaded, for fast deployment. Extreme tactical rings are not out of place on varmint rifles or big game rifles that may be exposed to the abuses of hard hunting and magnum recoils. 1 inch pair of rings. Ultralight weighs 9.

8 oz. Weighs 6. 7 ounces. Aluminum contruction. These vortex hunter rings position the center of the riflescope tube at a height of 087 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Sold two rings per package. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need. A stainless steel spring flips the cap into multiple stop positions at 45 and 90 degrees. Outside diameter: 45. 5-48.


Similar products:

---

Weaver Extended Multi-Slot Base - Remington SA 20MOA

Protected by a matte, Type III hard coat anodized finish. No slip/strip Torx screws. Hunting scopes mounts. Made of the highest quality materials Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle.

The cantilever ring mount positions the center of the riflescope tube at a height of 1. 59 inches 4039 mm from the base. Picatinny bases are designed for specific models of firearms. Another quality Bushnell product. Extreme tactical rings are not out of place on varmint rifles or big game rifles that may be exposed to the abuses of hard hunting and magnum recoils.

Made in the USA. Please read all label information on delivery. Torque adjustment range from 10 inch/pounds to 65 inch/pounds, Includes convenient molded case for storage. 1/2-inch size. Accuracy plus/minus 2 inch/pounds up to 40 inch/pounds, 40-65 inch/opounds is accurate to plus/minus 5%.


Similar products:

---

Wheeler Professional Reticle Leveling System

The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The vertical position is for inserting your dope disk in to have easy access to while shooting. Includes 10 of the more popular gunsmithing bits and a 1/4" socket. Cnc machined aluminum level housings. Accuracy plus/minus 2 inch/pounds up to 40 inch/pounds, 40-65 inch/opounds is accurate to plus/minus 5%.

Cnc machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. Protected by a matte, Type III hard coat anodized finish. Weighs 6. 7 ounces. Aluminum contruction. These vortex hunter rings position the center of the riflescope tube at a height of 0

87 inches 22. 0 mm from the base. Mounting to a picatinny or weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength. Sold two rings per package. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need.




Similar products: